• HOLE COAT is used to coat your bore hole.
  • HOLE COAT is a highly concentrated product that rapidly develops into a very high viscosity fluid when mixed with water.
  • HOLE COAT provides viscosity yields 40-50% greater than conventional liquid polymers, and can be used in fresh or brine water.
  • HOLE COAT is an excellent inhibitor against shales, clays, fractured zones, sand and blocky formations, and contaminants.
  • HOLE COAT is resistant to viscosity change under high water temperature conditions.
  • HOLE COAT reduces wear rate on head of slide guides when used with Torqueless HDD.
  • HOLE COAT has superior shear resistant properties.


SUGGESTED DOSAGE:

Recommended mixture would be 1 liter of product per 1000 litres of water(1 quart – 250 gallons) depending on water conditions. More can be added at any time when higher viscosity is required.


**For specific information, or difficult drilling conditions, please contact your local distributor or Control Chemical by telephone or e-mail. **

A NEW HIGH-TECH LIQUID POLYMER VISCOSIFIER AND FLUID LOSS CONTROL PRODUCT.

HOLE COAT